Expert HVAC Services in Glen Ellyn, IL

Completed comprehensive BFMA tune-up service on three air conditioning units, all 6-7 years old. Performed full system inspections including evaporator coil examination, condenser coil cleaning, refrigerant level verification, electrical connection testing, and airflow assessment. All units found to be operating within manufacturer specifications with coils in clean condition and proper heat exchange occurring across fin assemblies.

Completed comprehensive BFMA tune-up on 9-year-old residential air conditioning system, including full system inspection, performance testing, and semi-annual filter replacement. Serviced outdoor condenser unit positioned in side yard installation, performed coil cleaning, verified refrigerant levels, tested electrical components, and confirmed proper airflow and drainage. System operating within manufacturer specifications with all safety controls functioning correctly.

Successfully installed new Ecobee smart thermostat to replace existing unit. Thermostat was pre-staged and delivered to site, then mounted on wall and programmed to system specifications. Unit is operational and displaying proper temperature readings.

Replaced existing thermostat with new Ecobee smart thermostat per client's request from previous quote. Verified proper wiring connections, configured system settings, and tested heating and cooling functions to ensure proper communication with outdoor condenser unit. System operating normally with all features functional.

Completed comprehensive BFMA semi-annual tune-up service on residential Lennox heating and cooling system. Performed thorough inspection and maintenance of indoor furnace unit and outdoor condenser, including filter replacement, system diagnostics, operational testing, and verification of all components functioning within manufacturer specifications.

Completed comprehensive BFMA tune-up service on a Trane outdoor condensing unit over three years old. Performed standard preventative maintenance procedures including system inspection, component cleaning, refrigerant level verification, electrical connection testing, and operational performance evaluation. Unit found to be operating within normal parameters with no immediate repairs required at time of service.

Completed comprehensive annual BFMA tune-up on residential air conditioning system for BlueFrost membership maintenance. Performed thorough inspection of evaporator coil, confirming proper fin condition and airflow characteristics. Inspected spray foam insulation application in attic space, verifying proper coverage and seal integrity around ductwork and penetrations. Cleaned condenser coil fins, removing debris and ensuring optimal heat transfer efficiency. Checked refrigerant levels, electrical connections, and capacitor performance. Verified thermostat calibration and system cycling. All components operating within manufacturer specifications with no deficiencies noted.

Completed comprehensive BFMA tune-up on Bosch heat pump system, 6+ years old. Performed full system inspection, checked refrigerant levels, tested electrical components, cleaned condenser coils, and verified proper operation of outdoor unit. Inspected and confirmed air filter condition, ensuring adequate airflow throughout the system for optimal heating performance.

Responded to service call for no water flow at downstairs bathroom faucet. Upon arrival, client reported initially no water pressure, followed by black discolored water discharge. Inspected chrome two-handle centerset faucet and plumbing connections at white porcelain sink. Determined issue was caused by sediment buildup in supply lines following extended period of non-use while property was vacant. Flushed water supply lines to clear accumulated debris and sediment until water ran clear. Tested faucet operation and verified full water pressure restoration with clear water flow at both hot and cold handles.

Completed comprehensive plumbing inspection of residential property during morning service call. Inspected and documented sump pump system with PVC discharge piping, electrical connections, and control unit in utility area, confirming proper installation and operation. Examined bathroom plumbing fixtures including toilet, bidet sprayer assembly, and associated hardware, verifying all components are functioning correctly with no visible leaks or deficiencies noted.

Completed comprehensive air conditioning tune-up on 8+ year old system during afternoon service window. Performed standard preventive maintenance protocol including inspection of all major components, refrigerant level verification, electrical connection testing, condensate drain evaluation, and filter assessment. Documented existing utility infrastructure and attic-mounted equipment installation with photographic records for maintenance history.

Completed comprehensive BFPMA tune-up service with complimentary plumbing inspection at residential property. Performed thorough evaluation of 9-year-old water heater system, including inspection of gas connections, flexible supply lines, shut-off valves, and venting components in basement utility area. Documented existing plumbing infrastructure conditions and verified proper operation of all accessible plumbing fixtures and connections throughout the premises.

Replaced failed condenser fan motor and blade assembly on Lennox unit serial number 5803C14708. Reused existing motor mount bracket, installed new motor with blade, and replaced deteriorated suction line insulation to restore proper system operation and prevent future refrigerant line sweating.

Completed comprehensive BFMA tune-up service on dual heating system consisting of 6-year-old heat pump and 27-year-old boiler. Inspected and tested Honeywell pressure control switch on boiler system, verifying proper cut-in pressure settings and electrical connections. Performed preventive maintenance on heat pump evaporator coils, noting standing water in drain pan and some fin discoloration indicating normal operational wear. Verified all safety controls, tested system operations, and confirmed both heating units functioning within manufacturer specifications.

Responded to no heat call at residential property. Upon arrival, accessed air handler unit and inspected internal components including blower assembly, electrical connections, and control board. Verified thermostat was calling for heat with setpoint at 70 degrees. Performed system diagnostics, checked all electrical connections, and tested capacitor functionality. System restored to proper operation with heat confirmed at thermostat.

Responded to service call for reported boiler leak. Upon arrival, performed comprehensive inspection of New Yorker boiler system and associated plumbing components. Examined copper piping network showing signs of age-related corrosion and oxidation, teal expansion tank, pressure gauge, and various valves throughout the mechanical system. Identified source of leak in plumbing assembly and assessed overall system condition. Utilized pipe wrenches and hand tools to address the leak issue and tighten connections as needed to restore proper system operation.

Responded to service call regarding overhead copper refrigerant line leak in furnace room that discharged oily residue onto surrounding surfaces. Upon inspection, observed evidence of refrigerant oil spray pattern on flooring, ductwork, and structural components beneath the copper line run. Documented existing conditions with photographs showing staining on plywood surfaces, copper refrigerant line routing through floor joists, and affected HVAC components. Based on visual assessment and client description of single occurrence event, leak appears to have self-sealed after releasing refrigerant charge from system. Recommended follow-up evaluation to identify leak source, pressure test system integrity, and determine if refrigerant recharge or line repair is required to restore proper operation.

Completed comprehensive BFMA tune-up service on 22-year-old commercial rooftop air conditioning units. Performed full preventive maintenance protocol including inspection of electrical disconnects, condenser coils, refrigerant levels, and all mechanical components to ensure optimal system performance and reliability for the upcoming cooling season.

# Service Report: Residential No Heat Call Responded to residential no heat call where system failed to operate overnight. Upon inspection, discovered significant corrosion on blower motor mounting bracket and assembly components, which compromised electrical connections and mechanical integrity. Identified corroded hardware and deteriorated mounting points affecting blower motor operation. Assessed electrical wiring condition, noting yellow and black wire routing through affected area. Documented equipment condition with photos showing extent of rust damage on critical mounting components and housing assembly. Recommended immediate replacement of corroded bracket assembly and affected hardware to restore safe system operation and prevent further deterioration of blower motor components.

Performed diagnostic service on 2015 Action-installed boiler that was leaking onto floor. Inspection revealed corrosion at copper pipe connection points to circulation pump, with visible discoloration at several fitting joints. Identified failed seal at pump assembly as source of water leakage.