Heating & Air Conditioning Services in Lombard, IL

Completed annual AC tune-up on residential system aged 5+ years, scheduled for afternoon arrival with 30-minute advance notice. Performed comprehensive maintenance including inspection of outdoor condenser unit, which showed significant accumulation of dirt, debris, and decomposed organic material on protective grille, fan blades, and drainage pan. Replaced indoor air filter and documented equipment condition through photos. All components inspected and system returned to proper operating condition.

Responded to residential no cooling complaint with reported ice formation on refrigerant lines and water accumulation in basement. Upon arrival, confirmed evaporator coil freeze-up condition causing reduced airflow and condensate overflow. Diagnosed restricted airflow due to dirty air filter and low refrigerant charge indicated by ice buildup on suction line at outdoor unit. Replaced air filter, allowed system to thaw completely, checked refrigerant pressures, and verified proper system operation with adequate cooling and no further water leakage.

Responded to no cooling call where unit had made loud noises and discharged brown material before being shut down by homeowner. Upon arrival, inspected Trane air handler and associated HVAC system located in utility closet. Examined equipment for signs of contamination, verified all connections, and checked condensate drainage system and evaporator coil for debris or biological growth that could have caused the reported discharge.

Completed comprehensive BFMA tune-up on 4+ year old Armstrong air conditioning system during morning service window. Performed standard maintenance protocol including inspection of outdoor condensing unit, evaporator coil assessment revealing significant dust and debris accumulation on coil fins requiring attention, and filter replacement. Collected membership payment via check as requested and documented equipment condition with photos showing condensing unit positioned on concrete pad with proper clearances and heavily soiled evaporator coil with white-gray particulate buildup affecting airflow efficiency.

Completed comprehensive BFMA tune-up on residential HVAC system including full air conditioning inspection, system performance testing, and dryer vent cleaning. Unit exterior showed vegetation overgrowth which was cleared to ensure proper airflow and prevent obstruction of ventilation components. Dryer vent was inspected and cleaned, removing accumulated lint and debris to restore proper exhaust function and reduce fire hazard risk.

Completed comprehensive BFMA tune-up service on an 8-year-old Armstrong Air condensing unit and water heater system. Performed thorough inspection of outdoor condenser unit, which exhibited significant dirt and debris accumulation on coil fins and heat exchanger surfaces, particularly in middle and lower sections. Cleaned condenser coils to restore proper airflow and heat transfer efficiency, removing caked-on dust, dirt, and organic debris that had accumulated between fins. Inspected fan motor assembly, electrical connections, and refrigerant lines running along exterior wall. Verified proper operation of condenser fan and checked top-mounted fan guard for secure installation. Assessed unit's exterior condition, noting weathering consistent with outdoor exposure on concrete pad. Performed standard maintenance procedures on water heater system per BFMA protocol. All equipment operational upon completion of tune-up service.

Completed comprehensive BFMA tune-up service on a 6-year-old residential air conditioning system. Performed full system inspection of outdoor condenser unit, verified proper operation of compressor and condenser fan, checked refrigerant lines and electrical connections, and confirmed unit is operating within manufacturer specifications. All components found in good working condition with no deficiencies noted.

Completed comprehensive BFMA tune-up service on Armstrong air conditioning system approximately 5 years old. Performed full system diagnostics using manifold gauges to check refrigerant pressures and temperatures, verified proper refrigerant charge levels, and inspected all copper line connections for leaks or wear. Cleaned condenser unit exterior panels and internal components, checked electrical connections at disconnect box, and ensured all safety controls were functioning properly. System operating within manufacturer specifications with no deficiencies noted.

Completed comprehensive BFMA tune-up service on an 8-year-old air conditioning system during scheduled morning appointment. Performed detailed inspection of condenser unit, noting significant exterior weathering and paint deterioration on metal panels, though internal components including capacitor, motor assembly, and electrical connections were found in functional condition. Inspected all wiring harnesses, verified proper electrical connections across multiple circuits, and assessed overall system operation to ensure continued reliability of the unit.

Completed comprehensive BFMA tune-up service on 3-year-old air conditioning system during morning appointment window. Performed standard AC maintenance protocol including inspection of condenser unit, which revealed significant dirt and debris accumulation on coil fins with heavy soiling on one side requiring attention. Verified thermostat operation showing Honeywell Home ProSeries unit functioning properly in cooling mode with system maintaining 75°F setpoint and circulating fan operational.

Completed comprehensive BFMA tune-up service on residential air conditioning system with equipment age 8+ years. Coordinated roof access with facility management, performed full system inspection of air handler unit and condensing unit, checked refrigerant pressures and temperatures using digital gauges, inspected copper line set and gas connections with shutoff valves, and verified proper operation of all mechanical components. System found operating within manufacturer specifications with no immediate concerns noted.

Completed comprehensive BFMA tune-up on 11-year-old air conditioning system during scheduled afternoon appointment. Performed thorough inspection of outdoor condenser unit, including examination of heat exchanger coils, refrigerant lines, electrical connections, capacitor, and all internal components. Verified proper operation of all electrical relays, wiring connections, and control systems within the unit, and documented equipment condition with detailed photographic records for maintenance history.

Completed comprehensive tune-up service on two air conditioning systems, both approximately 24 years old. Performed standard maintenance procedures including inspection of all major components, checking refrigerant levels, testing electrical connections, and evaluating overall system performance. Documented existing air filter conditions showing moderate dust accumulation with visible particulate matter embedded in pleated filter media; filters remain functional but show normal wear from extended service. All systems operational upon completion of maintenance.

Completed comprehensive BFMA tune-up service on residential air conditioning system with equipment aged 1+ years. Performed standard maintenance procedures on outdoor condenser unit including inspection of cabinet condition, fan assembly, and protective grilles, with unit showing normal weathering consistent with age and outdoor exposure. All components inspected and system confirmed operational on concrete pad with adequate clearance for airflow and future service access.

Completed comprehensive BFMA preventive maintenance tune-up on residential air conditioning system. Performed full system inspection of outdoor condenser unit, verified electrical connections at disconnect box, checked refrigerant levels, cleaned condenser coils, and tested operational performance to ensure optimal cooling efficiency for the upcoming season.

Completed BFMA tune-up on 13-year-old air conditioning system and investigated condensate pump noise complaint. Inspected condensate pump installed in 2021, which was cycling excessively during AC operation; verified discharge line was clear and pump was functioning properly despite frequent cycling, which is normal during high humidity conditions. Examined exterior condenser unit and confirmed proper operation with no mechanical issues noted.

Completed annual air conditioning maintenance and tune-up on residential cooling system. Performed comprehensive system inspection including condenser unit examination, evaporator coil assessment, and airflow verification. Replaced air filter with new pleated media filter to ensure optimal system performance and indoor air quality. Inspected ductwork interior for debris accumulation and structural integrity, confirming proper airflow pathways and secure fastener connections throughout galvanized metal duct sections. All components operating within normal parameters with no issues identified during service visit.

Responded to service call for furnace malfunction initially suspected to be thermostat-related. Customer had contacted Ecobee support who indicated potential high limit switch issue with the heating system. Upon arrival, performed diagnostic inspection of furnace unit located in basement mechanical room. Conducted electrical testing using clamp meter to verify current draw and system operation. Inspected high limit switch, safety controls, and associated wiring. Examined furnace operation through complete heating cycle to assess component functionality. Documented equipment condition and diagnostic findings with photographs of furnace installation and electrical measurements for service records.

Successfully replaced malfunctioning Variable Frequency Drive (VFD) in commercial Lennox rooftop unit with new component that was staged at headquarters. Verified proper operation of belt-driven blower assembly and motor connections following installation, ensuring system functionality was fully restored.

Performed diagnostic service on Armstrong Air furnace that was not turning on, causing home to be cold. Discovered control board was not receiving power; traced issue and restored system functionality, ensuring proper heat operation.