Heating & Air Conditioning Services in Lombard, IL

Completed comprehensive BFMA tune-up service on 15-year-old Carrier air conditioning system. Performed full preventive maintenance including inspection of outdoor condenser unit, verified proper operation of all components, checked electrical connections at disconnect and meter, and confirmed system is operating within manufacturer specifications. Unit showed good overall condition with clean coil fins and properly functioning fan assembly.

Responded to service call for frozen evaporator coil on residential air conditioning system. Upon arrival, confirmed coil freeze-up condition and initiated diagnostic procedures using manifold gauges to assess refrigerant pressures and system operation. Installed replacement evaporator coil assembly and performed complete system recovery and evacuation. Due to additional parts requirements identified during installation, scheduled follow-up appointment to complete final refrigerant recharge, system startup, and performance verification testing.

Completed comprehensive BFMA tune-up service on two Trane air conditioning systems, both over 5 years old. Performed full system diagnostics including electrical testing with multimeter and clamp meter, inspected refrigerant lines and connections, cleaned condenser coils, checked compressor operation, and replaced air filters. All units tested within normal operating parameters and left in proper working condition.

Responded to no cooling complaint on residential system. Upon arrival, evaluated HVAC equipment in basement mechanical room and discussed customer concerns regarding potential low refrigerant charge. Conducted visual inspection of furnace, ductwork, and associated mechanical components to assess system condition and determine appropriate repair options.

Completed comprehensive BFMA tune-up on residential air conditioning system with 5-year-old equipment. Performed full inspection of outdoor condensing unit including cleaning of condenser coils, verification of proper refrigerant levels, electrical connection testing, and assessment of fan motor operation. Inspected indoor air handling components and ductwork infrastructure, confirming all systems operating within manufacturer specifications with no deficiencies noted.

Responded to no-heat call for flooded HVAC system in basement utility area. Assessed existing American Standard furnace and air conditioning unit, both requiring replacement due to water damage. Documented equipment conditions and surrounding ductwork configuration, noting previous evaporator coil replacement from service history. Scheduled full system replacement estimate appointment to propose appropriate equipment sizing and comfort solutions for the home.

Responded to no cooling call at residential property where basement flooding had compromised HVAC system functionality. Upon inspection, found furnace equipment affected by water damage, with unit manufactured in January 2013 (Model RAUN30BCA0427BA). Documented existing conditions including plumbing infrastructure and mechanical components in flooded area. Assessed system for potential repair versus replacement options and provided customer with recommendations based on extent of water damage to equipment. Customer expressed interest in exploring both repair and replacement solutions for restoring cooling capacity to residence.

Completed comprehensive air conditioning tune-up on a 5-year-old residential cooling system. Performed thorough inspection of outdoor condenser unit, verifying proper operation of compressor, condenser fan motor, and electrical components. Checked refrigerant pressures and temperatures to ensure system is operating within manufacturer specifications. Inspected condenser coil fins for damage and debris accumulation, finding unit in good condition with clean aluminum fins and protective grille guard intact. Verified adequate clearance around outdoor unit and proper drainage. Tested capacitor values and electrical connections for safe operation. Inside the residence, inspected the air handler and evaporator coil assembly. Evaluated the existing air filter condition and confirmed proper airflow through the system. Checked condensate drain line for blockages and proper drainage. Verified thermostat operation and calibration for accurate temperature control. Measured temperature split ac

Completed comprehensive BFMA tune-up service on a 12-year-old outdoor air conditioning condenser unit. Performed full system inspection, cleaned condenser coils and fins to remove accumulated dust and debris, verified proper operation of all components, and documented equipment condition with photographic records. Unit is operating within normal parameters and ready for continued service.

Responded to residential sump pump short cycling issue on a two-year-old unit. Upon inspection, found significant sediment and debris accumulation in the sump pit basin affecting the float switch operation, causing the pump to cycle prematurely. Removed sump pit cover, extracted debris from pit, cleaned float mechanism and pump intake area, verified proper float movement and switch activation, tested pump operation through multiple cycles to confirm normal run times, and reassembled system with proper functionality restored.

Responded to no-cool service call on 12-year-old residential air conditioning system. Upon arrival, performed diagnostic testing on outdoor unit using digital multimeter to assess electrical components. Tested dual-run capacitor for proper microfarad readings and voltage levels, as capacitor failure is common cause of compressor and condenser fan motor issues on systems of this age. System restored to normal cooling operation.

Completed comprehensive BFMA tune-up service on Trane outdoor condensing unit. Performed standard air conditioning maintenance protocol including system inspection, cleaning of evaporator coils which showed significant dust and debris accumulation, and verification of refrigerant lines and copper tubing connections. All components tested and system restored to optimal operating condition.

Responded to service call for reported heat pump leak in attic. Upon inspection, found Mitsubishi ductless mini-split system operating normally with no refrigerant leaks detected, no water leaks present, and no visible deficiencies noted. Unit functioning properly at time of service with all components operating within normal parameters. No trouble found during thorough inspection of indoor unit and surrounding area.

Completed comprehensive plumbing inspection as part of maintenance tune-up service, scheduled for afternoon arrival per customer request. Inspected interior plumbing system including copper supply lines with brass shut-off valve and red handle control mechanism in wall cavity, verified proper operation and checked for leaks. Examined bathroom plumbing fixtures including toilet, shower valve assembly, and associated water supply connections to ensure all components functioning properly with no visible issues detected.

Completed comprehensive BFMA tune-up on Lennox HVAC system serving main house zone. Performed standard maintenance protocol including inspection of thermostat operation, verified system settings with heating setpoint at 62°F and cooling setpoint at 66°F, confirmed Away mode functionality. Inspected interior cabinet components and noted debris accumulation in bottom corner of unit housing, which is typical for equipment age 1+ years. System operating within normal parameters at time of service.

Conducted sales estimate for air conditioning system replacement. Evaluated existing First Co. 16MCU-10AB air handler unit and associated electrical infrastructure, including Square D breaker panel with appropriate amperage ratings for HVAC equipment. Documented current equipment specifications and electrical connections to provide comprehensive replacement proposal for new A/C and coil system.

Completed comprehensive BFMA tune-up service on a 9+ year old residential air conditioning system. Performed standard maintenance protocol including inspection of outdoor condenser unit, verification of electrical connections at disconnect box, assessment of unit mounting and clearances, and replacement of HVAC air filters with new pleated media filters. System operational and running within normal parameters upon completion.

Completed comprehensive BFMA tune-up service on residential air conditioning system over 3 years old. Performed standard maintenance protocol including inspection of Emerson control board and wiring connections, verified proper operation of Honeywell digital thermostat displaying 72°F ambient with cooling setpoint at 67°F, and documented system components through photographic records. All electrical connections, control circuits, and thermostat functions tested and confirmed operational with system running in cooling mode.

Completed comprehensive BFMA tune-up service on 9-year-old residential air conditioning system. Performed full system inspection of outdoor condensing unit, checked refrigerant lines and electrical connections, cleaned condenser coils, verified proper operation of all components, and documented unit condition with photographic evidence. System is operating within normal parameters and ready for continued service.

Completed comprehensive AC tune-up on outdoor condensing unit. Inspected heat exchanger coils which showed significant dirt and debris accumulation, particularly in lower sections and between aluminum fins. Performed standard preventive maintenance procedures including system performance evaluation and visual inspection of all accessible components. Unit operational upon completion of service.