Trusted HVAC, IAQ & Generator Services in Carol Stream, IL

Completed comprehensive BFMA AC tune-up on 6-year-old system, including inspection of evaporator coil assembly and air filtration components. Noted clean pleated air filter in proper working condition within metal housing. Observed evaporator coil with aluminum fin assembly and copper refrigerant lines showing minor age-related patina; identified vegetation growth and debris accumulation in condensate drain pan indicating moisture retention and potential drainage concerns that may require future attention to prevent biological growth and maintain optimal system performance.

Replaced evaporator coil in residential 410A air conditioning system. Evacuated and recharged system with proper refrigerant levels, verified system pressures and operation with digital manifold gauges to ensure optimal cooling performance.

Responded to no cooling call regarding reported refrigerant leak on residential Goodman furnace system. Upon arrival, performed visual inspection of indoor unit and associated components including condensate drainage system, PVC vent piping, and refrigerant lines. Documented equipment installation with photographs showing furnace, white PVC condensate and vent pipes, copper refrigerant lines, and electrical connections. System assessed for visible signs of refrigerant leakage, condensate issues, and proper venting. Unit operational at time of inspection with no immediate leaks detected during visual examination.

Completed comprehensive BFMA tune-up service on residential Amana air conditioning system. Performed full system inspection of outdoor condensing unit, including cleaning of condenser coil which showed moderate accumulation of dirt and debris. Evaluated electrical connections at disconnect box, verified proper refrigerant levels, tested compressor operation, and inspected conduit mounting. Filter assembly exhibited significant particulate buildup and contamination across mesh surface, with heavier accumulation noted on one side indicating restricted airflow. Cleaned accessible components, confirmed unit operational parameters within manufacturer specifications, and verified system cycling properly. Equipment positioned on gravel pad with adequate drainage and clearance from structure.

Completed comprehensive plumbing inspection as part of preventative maintenance tune-up service. Inspected basement plumbing infrastructure including PVC drainage system with multiple vertical standpipes, floor drains, and associated piping secured with rubber couplings and hose clamps. Verified proper installation of Charlotte Pipe Schedule 40 PVC components meeting ASTM D1785 specifications, examined pipe connections and support framing, and assessed drainage system for proper function and potential issues.

Completed comprehensive BFMA tune-up on residential Trane air conditioning system aged 3+ years. Performed standard maintenance protocol including inspection of condenser unit, verification of electrical connections at disconnect box, cleaning of condenser coils, and operational testing of all components. Unit operating within normal parameters upon completion with all safety checks verified.

Completed comprehensive BFMA tune-up on 15+ year old air conditioning system. Performed thorough inspection of indoor air handler, finding blower wheel assembly with moderate dust accumulation but otherwise functional condition. Outdoor condenser unit inspection revealed significant wear including damaged fan grille with multiple broken sections, deteriorated protective housing, and debris accumulation around motor assembly. Cleaned condenser coils, removed leaves and organic matter from unit interior, and assessed overall system operation. Equipment shows age-related wear consistent with 15+ years of service but remains operational following maintenance procedures.

Completed commercial preventative maintenance tune-up on two rooftop units at the facility. Performed standard inspection procedures including checking thermostat operation, verifying system controls, and assessing overall equipment condition. Noted heavy dirt and debris accumulation on evaporator coil fins with compromised insulation, which may impact system efficiency and cooling capacity if not addressed.

Responded to a commercial HVAC service call for a rooftop unit requiring filter replacement and economizer actuator repair. Replaced the failed economizer actuator that was preventing proper outdoor air control and installed new pleated air filters in the air handling section. Parts and filters were staged at headquarters prior to arrival. Unit tested and verified operational upon completion.

Completed comprehensive tune-up service on wall-mounted tankless water heater unit. Performed thorough inspection of all internal components including heat exchanger, burner assembly, and control board. Cleaned heat exchanger surfaces, verified proper venting through white PVC exhaust pipes, and inspected all copper plumbing connections for leaks or corrosion. Tested unit operation, confirmed proper gas combustion, and verified all electrical connections and safety controls were functioning correctly. Unit returned to normal operating condition with all components performing within manufacturer specifications.

Completed BFMA tune-up service on a 9-year-old Trane XL80 furnace and associated outdoor air conditioning unit. Performed comprehensive system inspection, replaced air filter, verified proper airflow through pleated media filter, and inspected outdoor condenser unit with decorative fence enclosure. All components operating within normal parameters with no deficiencies noted at time of service.

Completed comprehensive AC tune-up service on Goodman outdoor condensing unit as part of recurring maintenance agreement. Performed standard inspection of condenser coils, verified proper fin condition and airflow, documented unit specifications and safety labels, and confirmed system is operating within manufacturer parameters. All components found in satisfactory condition with no immediate repairs required.

Completed comprehensive plumbing inspection as part of preventative maintenance tune-up service. Performed thorough assessment of all accessible plumbing fixtures, supply lines, drain systems, and shut-off valves throughout the residence. All systems found to be operating within normal parameters with no leaks, deficiencies, or immediate repair needs identified at time of inspection.

Completed comprehensive plumbing inspection including evaluation of bathroom faucets as requested by property owner. Performed water quality testing using hardness solution analysis to assess mineral content and overall water condition. Inspected basement plumbing infrastructure including PVC drainage system, radon mitigation piping, and associated utility connections, verifying proper operation and structural integrity of all visible plumbing components.

Completed scheduled BFMA preventive maintenance tune-up on three rooftop units at commercial facility. Performed comprehensive inspection and service on all RTU systems including Trane and Siemens equipment, verified operational status of compressors, condensers, and electrical disconnects, checked refrigerant levels, inspected condenser coils and fan assemblies, tested all safety controls and electrical connections, and documented equipment conditions with photographic records. All units found to be in proper working order with no immediate repairs required.

Completed comprehensive BFMA tune-up service on a 4-year-old HVAC system. Performed thorough inspection of blower assembly and motor components, noting significant dust and debris accumulation on the squirrel cage blower wheel blades. Cleaned and serviced all accessible components including the blower wheel, motor assembly, and surrounding enclosure to restore optimal airflow and system efficiency.

Completed installation of new air conditioning system, upgrading to EL16KC1-036 outdoor condensing unit paired with CK40CT-30/36 evaporator coil. Protected interior flooring with drop cloths during installation process and verified electrical requirements for 30-amp 2-pole circuit breaker to properly power the new equipment.

Completed full HVAC system estimate at residential property. Evaluated existing furnace/air handler installation in basement utility area, including ductwork connections, PVC condensate drainage lines, gas connections, and electrical wiring. Assessed electrical service panel and circuit breaker configuration to determine compatibility with proposed system replacement.

Completed comprehensive air conditioning tune-up maintenance service on residential HVAC system. Performed thorough inspection of outdoor condenser unit and indoor evaporator coil assembly, noting dust and debris accumulation on coil fins. Cleaned evaporator coils, inspected refrigerant lines and insulation for integrity, checked all electrical connections, verified proper airflow, and tested system operation to ensure optimal cooling performance. Addressed all customer questions and concerns throughout the service visit to ensure complete satisfaction and understanding of system condition.

Completed comprehensive BFMA tune-up service on a 3-year-old air conditioning system during scheduled afternoon appointment. Performed standard maintenance protocol including inspection of ductwork components, which showed proper installation and good condition with clean interior surfaces and secure seam connections. All system components were evaluated and serviced according to preventive maintenance checklist, ensuring optimal performance for the cooling season.